KENWOOD COMPACT 4-CHANNEL POWERSPORTS/MARINE AMPLIFIER — 50 WATTS RMS X 4]
Power for your music on land or sea
Kenwood's compact kac-m5014 four-channel marine and powersports amplifier delivers a solid 50 watts rms per channel, over-powering noise from wind, water, or the trail, and adding clarity and impact to your music. The amp features conformal-coated circuit boards and protective covers for its connections, so the music won't stop just because the amp got a little wet or dirty.
Works with almost any system
The kac-m5014 will accept an input signal from just about any source, whether it's rca cables from an aftermarket receiver or the high-level speaker wiring from a factory radio. The high-level inputs can sense the signal and turn the amplifier on, so you won't need to run a separate remote turn-on lead from the receiver or factory fuse box. The amp's high- and low-pass filters let you tune the sound to match your speakers and their locations.
Specifications:
- Compact 4-channel powersports/marine amplifier
- 50 watts rms x 4 at 4 ohms
- 75 watts rms x 4 at 2 ohms
- 150 watts rms x 2 bridged at 4 ohms
- Class d amp technology
- Variable high- and low-pass filters (50-200 hz, 12 db/octave)
- Conformal-coated circuit boards
- Preamp and speaker-level inputs
- Speaker wire to rca adapter required for speaker-level input
- Signal-sensing turn-on with speaker-level inputs
- Wiring and hardware not included with amplifier
- 8-gauge power and ground leads recommended
- Fuse rating: 40a x 1
- Dimensions: 9-3/4"w (including wiring) x 2"h x 4-3/16"d
What's in the box:
- Kenwood kac-m5014 owner's manual
- 4-channel moto-marine amplifier
- Power/ground/input-output harness (installed) w/ inline 40a atc fuse
- Four 5/8" screws
- Two 4" wire ties
- Instruction manual
- Warranty information